Description

SKU: FMS-ECLIPSE II-LVT

• Size: 100 SQ.FT Rolls.
• Thickness: 075” (2mm)
• Weight : 5.5 lbs per roll
• Product: Closed cell moisture resistant EVA foam rubber

• Reduces floor noise by providing excellent sound absorption

• To use under LVT, WPC and SPC for floating installations

• Provides cushioned comfort under laminate and floating wood floors

• The Eclipse II has high density and compression resistance properties that enable your floor to perform to its fullest potential and last a lifetime

• The moisture barrier film and tape strip combine to lock out moisture and allow for quick and easy installation.

• Eliminates minor subfloor imperfections

• The Eclipse II adds insulation value with an R-value of .29

• Suitable for use with radiant heat flooring systems

• 100% recyclable, environmentally friendly, non allergenic and odorless

• APPROVED SUBSTRATES

  • Dry, completely cured concrete (at least 14 days old with HVAC operating)

  • 3/4″ interior plywood or OSB flooring

  • Waterproofing and crack-isolation membranes

  • Cement backer units

  QUICK AND EASY INSTALLATION

  1. Subfloor surface must be clean and dry before installation.

  2. Start on a corner of room wall. Unroll Eclipse II underlayment (film side down) over the subfloor. 
     Be sure tape strip side is next to the wall and overlapping film lip is toward the open room.

  3. Roll out next row in the same manner butting foam close to first row and covering overlapping plastic film lip. 
     Do not overlap foam pad just the overlapping plastic film lip.

  4. Remove tape liner and secure the overlapping plastic film lip to it. Continue with installation. 
     Seal all open seams with aggressive adhesive plastic tape.

  5. Install flooring per manufacturer’s instructions.